The Baker M4i DeDuster
has been designed to be a super-high-performance dust removal machine
that will accept and remove sawdust from the highest production
multi-head horizontal band resaw today. The M4i DeDustercan operate at over 700 feet per minute!
Boards drop into the M4i DeDuster hopper. The
hopper’s height adjustment (for the amount of lumber), indexable stops
(for the length of the lumber), and adjustable fence (for the width of
the lumber) allow you to set it up for the most efficient operation.
This virtually eliminates jam-ups. The hopper’s variable-speed conveyor
sends the lumber through the M4i DeDuster chamber one
piece at a time. The rear height adjustment of the conveyor can be
adjusted from a minimum of 24" and up to 34" maximum.
Inside the M4i DeDuster chamber, high-speed brushes
clean all four sides of the boards. The independently powered brushes
are fully adjustable for longer brush life.
The specially designed chamber maximizes air flow, directing the dust out the dust chamber instead of back onto the boards.
The entire side of the chamber easily opens for full open accessibility.
The Baker M4i DeDuster comes with its own electrical panel and a stand-mounted, remote start/stop control station.