SHOP PRODUCTS
NEW EQUIPMENT
Band Resaws - Single Cut
Band Resaws - Multi Cut
Sawmills
Scragg Mills
Board Edgers
Cut Off Saws
Notchers / Pallet Equipment
Board DeDusters
Planers / Moulders
Conveyors / Log Decks
Baker Specialty Equipment
Lumber Stacking Racks
Self Dumping Steel Hopper
USED EQUIPMENT
CONSIGNMENT SALES
IN STOCK INVENTORY
Parts Store
Featured Products

Scragg Mill - Baker Circle Tri-Scragg Mill
LEARN MORE

Manual and Air Activated Chop Saws
LEARN MORE

Resaw - Model C & CX Single
LEARN MORE

Baker BP Dominator™
LEARN MORE

Baker Double Notcher X2
LEARN MORE
Notcher - Double Notcher with optional Unscrambler
Model Number: Notcher - Double Notcher with optional Unscrambler




Height: 78 in. (198 cm)
Width: 101 in. (256 cm)
Length: 90 in. (229 cm)

The Baker Double Notcher is known for its long-lasting durability and high production. For people with high production needs, this incredible machine  will produce around 4,000 stringers per hour.

To operate the Baker Double Notcher, material is placed in the hopper, either manually or using the optional Unscrambler (highly recommended). The material is then guided in front of the pusher, which automatically moves the stringers under the weight bars and over the top of two cutter heads. The notched stringers then exit the rear of the machine, ready for stacking or assembly.

  • High production
  • Hopper feed
  • Hand cranks for cutter head positioning and notch height adjustment
  • Metal shields and rubber belting totally enclose the table for the operator’s protection
  • Indexable replaceable tip cutters
  • 28 in. (71 cm) minimum to 76 in. (193 cm) maximum doublenotched stringer capacity standard
  • Built-in 10 in. (254 mm) diameter ducts will exhaust to the left or right
  • Cutter heads hand-crank close to 6 in. (15 cm) inside and 53 1/2 in. (136 cm) outside
  • Unscramble infeed ensures quick feeding of stringers
  • Table top hand crank adjustment raises and lowers to allow of depth of notch from 0 to 3 in. (0 to 7.6 mm) standard
  • Board guides are adjusted via a hand crank.
  • Allow motors to be started with the cutters away from wood
Specifications
  • Production Rate: Pusher cycles 4,000 per hour
  • Cutters: Two 12” (305 mm) diameter x 9” (229 mm) long with indexable, replaceable tips in 1/2“ (13 mm) segments
  • Arbors: Two 21/2” (64 mm) diameter x 10” (254 mm) long
  • Sawdust Removal: 10” (254 mm) opening, 3,600 CFM (102 m³/min) minimum recommended
  • Dimensions and Weight:
    • Length: 90” (229 cm)
    • Width: 101” (256 cm)
    • Height: 78” (198 cm)
    • Table-top Height: 35” (89 cm)
    • Weight: 5,000 lbs. (2,268 kg)
Power
  • Motor: Two 30-hp (22 kw) TEFC (one each per cutter head) 2-hp TEFC on optional unscrambler
  • Electrical: All voltages available; Standard: 240v or 480v, 3-phase, 60Hz; machine completely prewired NEMA 12 enclosure with starters, disconnects, control voltage transformer and circuit overload protectors; start/stop station with E-stop button
  • Operating Air Pressure: 120 PSI (827 kPa), 1/2” (13 mm); 30 CFM (0.85 m³/ min)
  • Pushers: Air-driven, but electrical-controlled with end travel limit switches
Capacities
  • Material Size: 2×4’s, 4×4’s, 4×6’s
  • Length: 28 in. up to 76 in. (71 cm to 193 cm) standard
  • Notch Depth: 0” (0 mm) minimum; 3” (76 mm) maximum
  • Notch Length: 9” (229 mm) standard
Options
  • Custom Board Lengths: 88” (223 cm) and 100” (254 cm) capacity machines for processing material up to 100” (254 cm) maximum
  • Notch Length: Up to 12” (305 mm) in 1/2” (13 mm) increments
  • Unscrambler: stringer separator for maximum production (88” material dimensions):
    • Length: 60” (152 cm)
    • Width: 83” (211 cm)
    • Height: 76” (193 cm)
    • Weight: 2,000 lbs. (907 kg)
  • Chip Removal: Auger for chip removal to left or right available 24”-wide chip conveyor available for waste removal
  • The Baker Double Notcher can easily be adapted to process stringers and wood specialties

Product specifications are subject to change without notice.





 



2012 © Copyright Baker Products. All Rights Reserved.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74