SHOP PRODUCTS
NEW EQUIPMENT
Band Resaws - Single Cut
Band Resaws - Multi Cut
Band Sawmills
Scragg Mills
Board Edgers
Cut Off Saws
Notchers / Pallet Equipment
Board DeDusters
Planers / Moulders
Conveyors / Log Decks
Baker Specialty Equipment
Lumber Stacking Racks
Self Dumping Steel Hopper
USED EQUIPMENT
CONSIGNMENT SALES
IN STOCK INVENTORY
Parts Store
Featured Products

Baker Circle Tri-Scragg Mill
LEARN MORE

Manual and Air Activated Chop Saws
LEARN MORE

Baker C & CX Model Single
LEARN MORE

Baker BP Dominator™
LEARN MORE

Baker Double Notcher X2
LEARN MORE
Manual and Air Activated Chop Saws
Model Number: Manual and Air Activated Chop Saws




Height: 69 in. (175 cm)
Width: 25 in. (64 cm)
Length: 48 in. (122 cm)








Baker Chop Saws give you fast production, high-quality, heavy-duty design, at an economical price. Chopping action applies blade force down and back to rail where material is properly held during cutting action.

These saws come complete and ready to run. Saw mounted starters and disconnects mean that all you have to do is run electricity to it. It's equipped to accept a 4 in. (102 mm) dust pipe.

The Baker Chop Saw comes in either fully manual (handle-operated) or air-activated (foot pedal-operated) versions. It comes with either 20 in (508 mm), 26 in (610 mm), or 36 in (914 mm) diameter saws. A 10 ft infeed rollcase and a 5 ft. outfeed rollcase come standard.

  • Air-activated or manual operated
  • 10- to 20-hp (depending on model) TEFC electric motors
  • Easy to setup, operate, and maintain
  • Can be used in any cut-to length operation
  • Heavy-duty tube steel construction
  • Powered and non-powered infeed and outfeed rollers available
  • Electrical panel—prewired with starter, disconnect, overload protection, and start/stop control station
  • Wire mesh cage with arm extensions standard
  • Right & Left hand models available
  • Manual or air stops available to match
  • Many options available

 

20” Manual

Specifications
  • Dimensions:
    • Height: 69 in. (175 cm)
    • Width: 25 in. (64 cm)
    • Length: 48 in. (122 cm)
    • Weight: Approx. 800 lbs. (318 kg)
  • Blades: 20 in. (50.8 cm) diameter, 60 teeth
  • Control: Handle
  • Dust Chute Opening: One 4 in. (102 mm) diameter (600 CFM recommended)
Power
  • Engine: 10 HP (7.5 kw) TEFC
  • All voltages available
Capacities
  • Cutting Capacity Dimensions to Choose From:
    • 5 x 7 in. (127 x 178 mm)
    • 6 x 6 in. (152 x 152 mm)
    • 4 x 8 in. (102 x 203 mm)
    • 2 x 10 in. (51 x 254 mm)
  • Note: Not all sizes are available on one model. Customer must specify maximum size of cut.
Options
  • Waste removal conveyor
  • Dead rollers in 5 ft. increments
  • Live rollers in 1 ft. increments
  • Manual stops
  • Air stops
  • Unscrambler
  • Dust pipes and blowers
  • Remote control station

20” Air

Specifications
  • Dimensions:
    • Height: 69 in. (175 cm)
    • Width: 25 in. (64 cm)
    • Length: 48 in. (122 cm)
    • Weight: Approx. 800 lbs. (318 kg)
  • Blades: 20 in. (50.8 cm) diameter, 60 teeth
  • Operating Air Pressure: 100 PSI
  • Controls: Foot pedal
  • Dust Chute Opening: One 4 in. (102 mm) diameter (600 CFM recommended)
Power
  • Engine:10 HP (7.5 kw) TEFC
  • All voltages available
Capacities
  • Cutting Capacity Dimensions to Choost From:
    • 5 x 7 in. (127 x 178 mm)
    • 6 x 6 in. (152 x 152 mm)
    • 4 x 8 in. (102 x 203 mm)
    • 2 x 10 in. (21 x 254 mm)
  • Note: Not all sizes are available on one model. Customer must specify maximum size of cut.
Options
  • Waste removal conveyor
  • Dead rollers in 5 ft. increments
  • Live rollers in 1 ft. increments
  • Manual stops
  • Air stops
  • Unscrambler
  • Dust pipes and blowers
  • Remote control station

26” Air


Specifications
  • Dimensions:
    • Height: 69 in. (175 cm)
    • Width: 25 in. (64 cm)
    • Length: 48 in. (122 cm)
    • Weight: Approx. 900 lbs. (408 kg)
  • Blades: 26 in. (66 cm) diameter, 60 teeth
  • Operation Air Pressure: 100 PSI
  • Controls: Foot pedal
  • Dust Chute Opening: One 4 in. (102 mm) diameter (600 CFM recommended)
Power
  • Engine:15 HP (11 kw) TEFC
  • All voltages available
Capacities
  • Cutting Capacity Dimensions to Choose From:
    • 7 x 9 in. (178 x 229 mm)
    • 8 x 8 in. (203 x 203 mm)
    • 6 x 10 in. (152 x 254 mm)
    • 4 x 12 in. (305 x 305 mm)
  • Note: Not all sizes are available on one model. Customer must specify maximum size of cut.
Options
  • Waste removal conveyor
  • Dead rollers in 5 ft. increments
  • Live rollers in 1 ft. increments
  • Manual stops
  • Air stops
  • Unscrambler
  • Dust pipes and blowers
  • Remote control station

36” Air


Specifications
  • Dimensions:
    • Height: 88 in. (224 cm)
    • Widght: 40 in. (102 cm)
    • Length: 72 in. (183 cm)
    • Weight: Approx. 1,500 lbs. (680 kg)
  • Blades: 36 in. (91.4 cm) diameter, 60 teeth
  • Operating Air Pressure: 100 PSI
  • Controls: Foot pedal
  • Dust Chute Opening: One 4 in. (102 mm) diameter (600 CFM recommended)
Power
  • Engine:20 HP (15 kw) TEFC
  • All voltages available
Capacities
  • Cutting Capacity Dimensions to Choose From:
  • 12 x 12 in. (305 x 305 mm)
  • Note: Not all sizes are available on one model. Customer must specify maximum size of cut.
Options
  • Waste removal conveyor
  • Dead rollers in 5 ft. increments
  • Live rollers in 1 ft. increments
  • Manual stops
  • Air stops
  • Unscrambler
  • Dust pipes and blowers
  • Remote control station

 

 

Product specifications are subject to change without notice.





 



2012 © Copyright Baker Products. All Rights Reserved.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74