Band Resaws - Single Cut
Band Resaws - Multi Cut
Scragg Mills
Board Edgers
Cut Off Saws
Notchers / Pallet Equipment
Board DeDusters
Planers / Moulders
Conveyors / Log Decks
Baker Specialty Equipment
Lumber Stacking Racks
Self Dumping Steel Hopper
Parts Store
Featured Products


Scragg Mill - Baker Circle Tri-Scragg Mill
Model Number: Scragg Mill - Baker Circle Tri-Scragg Mill

Call for details on dimensions.

If you’ve been trying to think of how you can simplify your assembly line process, we’ve just made your choice easy.

The Baker Circular Tri- Scragg Mill uses a sharp chain feed with links every 4”. After the log is sawn by two 48” (52” optional) circular blades, the two-sided scragg block is then fed through a horizontal band blade. Self-centering wheels center the two-sided scragg block and eliminate twisting as it passes. The horizontal band blade splits the scragg block, making it into two three-sided cants, ready to be resawn.

Choose the Baker Circular Tri-Scragg Mill. It’s a combination you can’t get anywhere else.

  • Accepts scragg blocks 5” to 16” in diameter, and 36” to 96” long
  • Gives a high yield of up to 75%*
  • Proven capable of producing 30,000 to 50,000 bf per day*
  • Circular saws easily move in and out to desired width setting
  • Uniframe construction
  • Fully guarded
  • Easy quick setup
  • Totally electrical complete
  • Two 48” circular blades cut with 5/16” kerf
  • One 13’2” × 1” band blade cuts with 0.072” kerf
  • Runs even frozen wood
  • Debarking is not necessary
  • Operators control station
  • High production and low maintenance
  • No special floor required
*Actual recovery rate and production dictated by log diameter. 
  • Production Rate: Up to 30,000-50,000 bf per day*
  • Band Wheels: 28”-diameter, CNC machined, dynamically balanced, solid steel wheels
  • Guides: Baker’s Exclusive Flat Guide System
  • Blades:
    • Two 48” (122 cm) circular blades Standard (Cuts with 5/16” [8 mm] kerf)
    • One 13’ 2” X 11/4” (4 m x 32 mm) band blade (Cuts with 1/16”+ [1.6 mm+] kerf) 
  • Band Blade Tensioning: Spring
  • Sawdust Removal: One 10” dust pipe outlet handles the dust for both circular saws and one 4” outlet provided for dust removal from band headrig
  • Dimensions & Weight: Call for details
  • Feed Speed: Variable
  • Controls: Hydraulic
  • Band Blade Height Settings: Operator controlled hydraulics
  • Width Control:
    • Standard: Two point hydraulic setworks
    • Recommended CFM for Dust Removal: A minimum of 3,600 CFM for circular blades and a minimum of 600 CFM for the band blade
  • Drive Motors:
    • Two 50 HP Standard (37 kw) (Each Circular Blade)
    • One 20 HP Standard (15 kw) (Band Blade)
  • Electrical: All voltages available; Standard: 240v or 480v, 3-phase, 60Hz; machine completely prewired;
  • Hydraulic Feedworks Power Pack:Up to 15 HP (11 kw) available 1,500 PSI sized to accommodate options
  • NEMA 12 enclosure with starters, disconnects, control voltage transformer and circuit overload protectors start/stop station with E-stop button
  • Log Diameter: 6” (152 mm) min., 16” (406mm) max.
  • Log Length: 36” min. (914 mm) 60” max. (1,524 mm)
  • Sharp chain drag feed with spike links spaced every 6" (152 mm)
  • Log turner/positioner
  • Log infeed deck with single log loading pacman system
  • Powered hold-down wheels
  • Longer log lengths available to 8’ max. (2.4m) upon request
  • Computer controlled setworks
  • Operator’s saw cab
  • Air conditioning for saw cab
  • Heater for saw cab
  • Complete systems
  • Complementary equipment such as edgers, double end trims, band slab edgers, resaws, connecting conveyors, etc, are available.
  • Log debarker and log merchandising

Product specifications are subject to change without notice.



2012 © Copyright Baker Products. All Rights Reserved.
(800) 548.6914 • PO Box 128 • 55480 Highway 21 North • Ellington, MO 63638 
Website Privacy Policy | Powered by Element 74